CONDORE - Mikrofon, H¯ytaler og IP
Frequency response: 50Hz – 16KHz
Noise Suppression: >15dB – no pumping noise
Echo Canceling: >40dB with conversion rate >40dB/sec
Residual echo suppressed to environment noise level preventing artificial ducking
Low latency – 10Msec
Power consumption – 500mAmp (from USB or POE)
G.711 (A-law and Mu-law)
G.729A (Annex B)
2.5” diameter, 48” long. Weight: 3.35 lbs
The Condor is housed in a metal tube; the outer shell is metal for sturdiness and
VoIP and Signaling
SIP –RFC 3261, SDP – RFC 2327 SIP over
TCP/UDP, Redundancy, Digest
Authentication, PRACK, Early Media
IPv4, TCP, UDP, ICMP, ARP, RTP, SRTP,
Static IP/DHCP IP Assignment, IEEE 802.1p/Q,
Plug-and-Play - No installation or additional drivers required
Audio Setup Utility is available for Windows.
Recording utility is available for Windows.
Recording utility allows you to record
conversations to your computer via the device.
Operating systems: Windows 98 and up / Linux / MacOS.
5V power supply
2 wall mounting brackets and 2 stands
Provisioning and Management
Web Server for Configuration and
Management, Configuration update via FTP, TFTP, HTTP, HTTPS, DHCP Options
(66, 67, 160, 12, 77, 42)
There are four light sources across the Condor, each includes blue and red LEDs. The red will be flashing when the unit is muted; the blue will indicate the direction of reception. They will also be used to indicate other activities like power up, programing, IP search, and so on.
Software and Controls
The Condor will be identified and selected as the default device on any Windows
application. You may have to select it as your default device for MAC OS.
The IP phone (SIP) is set up using a web based GUI that can be logged in from any device sitting on the same network as the Condor.
Phoenix offers a few software control and support utilities on its website. These
include recording software, test wizard, and maybe the most important – an audio setup utility. You can control the Condor’s
microphone and speaker volume using this utility. These volumes can be controlled
separately for signals coming through the SIP link or the USB link.
Dialing – using the Condor as your
conference phone requires a dialer. The
dialing is done through a software
application running on a device that is
connected to the same network. Two major platforms on which this application is
available are Windows and IOS. The dialing application allows you to associate the app with a particular Condor (on your network), dial out, take calls in, call from your personal contact list, use the company’s contact list, mute the unit, and more. Check our website for additional platforms on which the
application is available.
USB – both data and power
Analog Speaker In via two RCA jacks (left and right signals)
Analog Speaker Out via two RCA jacks (left and right signals)
Analog System Out (microphone output) via RCA jack (line level)
Digital Speaker In via optical link (stereo)
Digital Speaker Out via optical link (stereo)
RJ45 Ethernet link – for network connection and IP phone